18
Turn Ignition Off within 10 seconds.
If no action taken in 10 seconds, Red light
then stays on to indicate Ignition On.
White light flashes every 3 seconds to
indicate programming mode.
Red light flashes to indicate
accelerometer sensitivity setting.
Turn Ignition on/off to toggle through
10 SEC
After the installation is complete
and tested, turn the ignition on and
immediately unplug the ride harness
from the ride module within 5 seconds.
Plug back in the Ride harness to the Ride
module with the IGNITION ON to access
Accelerometer Programming mode.
During first 10 seconds the white LED will
blink slowly to indicate countdown.
ACCELEROMETER
PROGRAMING
Commentaires sur ces manuels